Model C200N50Z4
Surface Mount Termination
200 Watts, 50
Description
The C200N50Z4 is high performance Aluminum Nitride (AlN) surface
mount termination intended as a cost competitive alternative to Beryllium
Oxide (BeO). The termination is well suited to all cellular frequency
bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high
power handling makes the part ideal for terminating high power 90
degree couplers and for use in microstrip circuits. The termination is also
RoHS compliant!
General Specifications
Features: Resistive Element Thick film
Substrate AlN Ceramic
RoHS Compliant
Terminal Finish Matte Tin over Nickel Barrier
200 Watts
Operating Temperature -50 to +200 C (see de rating chart)
Tolerance is 0.010, unless otherwise specified. Designed to meet of exceed
DC - 2.2 GHz
applicable portions of MIL-E-5400. All dimensions in inches.
AlN Ceramic
Electrical Specifications
Non-Nichrome Resistive
Resistance Value: 50 Ohms, 2%
Element
Power: 200 Watts
Low VSWR
Frequency Range: DC 2.2 GHz
Return Loss >20 dB to 2.2 GHz
100% Tested
Specification based on unit properly installed using suggested mounting instructions
Small Size and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2
USA/Canada:
(315) 432-8909
Available on Tape
Toll Free:
and Reel For Pick and
(800) 544-2414
Place Manufacturing.
+44 2392-232392
Europe:
Model C200N50Z4
Typical Performance:
C200N50Z4 C200N50Z4
Power De-rating: Tape & Reel [Available]:
*Actual performance could be limited by the solder properties of the
application
Mounting Footprint and Procedure:
2 of 2
USA/Canada: (315) 432-8909
Available on Tape and
Reel For Pick and Place
Toll Free: (800) 544-2414
Manufacturing.
Europe: +44 2392-232392