GCC-1

TM GEMexpress is a universal TFT/OLED driver PCBA Introduction: It is a fast, inexpensive production solution for adding a graphic user interface to an embedded TM product. GEMexpress allows for greater design TM GEMexpress flexibility and a shorter time to market. This new hardware approach to GUI integration contains all of Amulets bill of materials, which is everything needed to drive the user interface. It just needs to be attached to a simple display interface board and the human interface is ready for production. GCC-1 As its easy to integrate, Amulet sees it as the express lane to production: fast, easy and cost effective. Features: Data Sheet Amulet AGB75LC04-BG-E 225-ball LFBGA Graphical OS Chip Integrated resistive 4 or 5 wire touch panel decoder Storage Capacity 32megabit SerialFlash for storing GUI pages 64megabit SDRAM (frame buffer) Serial Interfaces 3.3v UART, TWI, USB Two 50 Pin Interface Connectors for LCD signals, power and serial communication Dedicated Crystal for System Small and compact 1.5 x 3.0, fits within the outline of a 3.5 TFT. GCC-1 Datasheet 1.0 - 1109 Electrical Characteristic 3.1 Recommended Operating Conditions 5V 4.75V - 20V 5V Recommended 500mA 5V Current 3.2 DC Characteristics V core Supply Current 22mA 1.2V V input Low Level -0.3 to 0.8V V input High Level 2V to (Vcc + 0.3V ) Pull Up Resistors 70K to 175KOhms IO Output Current 8mA Static Current Excluding Power on 600uA Reset V core = 1.2V Static Current Logic cells consumption, 30uA including Power on Reset and all input drivers V core = 1.2V