Product Information

THERMOPOX 85CT

THERMOPOX 85CT electronic component of Amepox Microelectronic

Datasheet
Heat transfer glue; 5g; 2.2W/mK

Manufacturer: Amepox Microelectronic
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 7.9314 ea
Line Total: USD 7.9314

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
     
Manufacturer
Product Category
Agent Features
Agent Application
Type Of Chemical Agent
Thermal Conductivity
Weight
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
Image Description
CMS-R-FLUID-TR electronic component of Phoenix Contact CMS-R-FLUID-TR

Cleaning fluid, 30 ml cleaning fluid for CMS-INK-TR-C5
Stock : 1

10439 electronic component of Desco 10439

Chemicals REZTORE SURFACE/MAT CLEANER 16 oz SPRAY
Stock : 1

832B-375ML electronic component of MG Chemicals 832B-375ML

Epoxy Adhesives Two Compound 2:1 Black 3.3Pa.s 5.3e12Ohm.cm 8250PSI
Stock : 0

834FX-450ML electronic component of Metz 834FX-450ML

CHEMICAL, POTTING COMPOUND, 450ML; Potting Compound Type:Epoxy; Dispensing Method:Bottle; Compound Colour:Black; Weight:0.94kg; Product Range:834FX Series; SVHC:No SVHC (27-Jun-2018); Volume:450ml
Stock : 0

834HTC-900ML electronic component of Metz 834HTC-900ML

CHEMICAL, POTTING COMPOUND, 900ML; Potting Compound Type:Epoxy; Dispensing Method:Can; Compound Colour:Black; Weight:1.93kg; Product Range:834HTC Series; SVHC:No SVHC (27-Jun-2018); Volume:900ml
Stock : 0

48-1/2X520 electronic component of 3M 48-1/2X520

Tapes Single Side Adhesive White PTFE Film 13.2m
Stock : 0

9223 electronic component of 3M 9223

Chemicals SCTCH-WLD HTMLT APPL PG II VALVE ASSY KIT
Stock : 1

9945 electronic component of 3M 9945

Chemicals HOT MELT APPLICATOR HEAVY DUTY BENCH STAND
Stock : 0

834ATH-375ML electronic component of MG Chemicals 834ATH-375ML

Chemicals Epoxy - Black, Flame Retardant Potting and Encapsulating Compound, UL 94V-0 (FILE # E334302).
Stock : 0

421A-500ML electronic component of MG Chemicals 421A-500ML

Chemicals Liquid Tin
Stock : 0

THERMOPOX 85CT THERMALLY CONDUCTIVE EPOXY * NEW GENERATION THERMALLY CONDUCTIVE EPOXY * VERY HIGH THERMALLY CONDUCTIVE COEFICIENT * SMOOTH AND SOFT PASTE * NO ELECTRICALLY INSULATION MATERIAL GENERAL DESCRIPTIONS: THERMOPOX 85CT is two components, 100% solid - new generation thermally conductive formulation. This paste has special prepared copper type of filler with very high tap density value. At this way is possible to fill of THERMOPOX 85CT as high as 85% of this filler. Because copper is material with the best thermally coefficient value (after silver), is possible to offer formulation with extremely high and stable thermally properties over 2 W/mK (ov. 13 BTU in/ sqft hr F). THERMOPOX 85CT is formulation with suitable working time, which allows sufficient time for all production applications. It possible to cure this system at room temperature initially also, with next post-curing in temperature range ab.100C. Alternatively, the cure schedule may be shortened with moderate heat. THERMOPOX 85CT has a very good adhesion to many different types of materials - especially glass, quartz, semiconductor chips and metals. Excellent thermally conductive properties are reason that THERMOPOX 85CT is ideal for all professional applications, where high heating occurs. This formulation is not electrically insulating material. SPECIFICATIONS: Number of components Two. Mixing ratio A : B (by weight) 10 : 0.3 Consistency after mixing A+B Heavy paste, 100% solids. Color Dark red. Percentage of fillers 85 1% Viscosity 630 000 680 000 cps (*) 630 680 Pa s. Thixotropy index (1/10 rpm) 2.8 3.2 Recommended curing schedule 80 C - 40 min. 100 C - 30 min. 120 C - 15 min. 150 C - 6 min. Acceptable curing conditions 50 C 2 hours + post curing Pot life 2.5 hours 25 C. Storage 6 months with closed container 25 C. (*) BROOKFIELD DVII SSA 14 1rpm 25C PHYSICAL PROPERTIES (*): Specific gravity(A+B) 3.7 3.9 g/ccm. Thermal conductivity Min.: 1.4 2.2 W/mK. Electrical resistivity > 5 x 10 E (6) m (with thickness over 0.1mm) Adhesion to ceramic after curing No less like 0.8 kG (*) Typical value for number of tests. ATTENTION: THERMOPOX 85CT is supplied as a double component material and is available in a variety of screw-top plastic jar sizes only. Minimum quantity is 100 grams. 1. Mix THERMOPOX 85CT Part A inside container very thoroughly before use. After adding hardener Part B, mix very thoroughly before use using wood or plastic spatula. Mix smoothly from the bottom of the container. Mix carefully - not to whip air into the product. INSURE THERMOPOX 85CT IS AT ROOM TEMPERATURE WHEN YOU WILL START WORKING WITH. 2. Prepare consistency before use according your SPECIFICATION. 3. If you need, use AXMC TH 85 thinner. Thinner will change paste mechanical properties. Pls, do not exceed 1% of weight. After first tests pls let us know about your viscosity requirements we will be able to change it for you. 4. Low mechanical properties and poor adhesion performance are symptomatic that THERMOPOX 85CT is under curing conditions. 5. Refrigeration during shelf time is useful. Keep container with formulation in temp. no less 10 C. Before use, increase paste temperature very slowly. 6. Use paste with adequate ventilation. 7. Avoid skin and eye contact. If ingested, consult a physician immediately. 8. Clean by MEK, alcohol or other suitable solvents. WARNING: Be careful on the case contacts with skin. When it occurs, wash immediately with soap and water. This information is based on data and tests believed to be accurate. AMEPOX MC makes no warranties (expressed or implied) as to it s accuracy and assumes no liability in connection with the use or inability to use this product. (Thermo-85CT)

Tariff Desc

3403 Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing as basic constituents, 70% or more by weight of petroleum oils or of oils obtained from bituminous minerals:
3403.1 -Containing petroleum oils or oils obtained from bituminous minerals:
3403.11 --Preparations for the treatment of textile materials, leather, furskins or other materials:
3403.11.10 ---In solid or semi-solid form 0.0%
3403.11.90 ---Other 0.0%
3814.00.00 Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers: 5.0%
3818.00.00 Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics 0.0%
3506 Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg:
3506.10.00 -Products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg 5.0%

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted