MN103

AC Current Probe Model MN103 Small, compact and very tough, the current (1mV/mA and 1mV/A). This Features Model MN103 is designed for voltage output enables instruments with measurements from 1mA to 100AAC. AC voltage ranges to measure, display Small, compact and very tough AC probes The clothes pin shape makes it ideal or log currents. The Model MN103 for use in tight areas, such as breaker permits True RMS measurements Clothes pin shape makes them panels, controller panels or outlets. It is when used with a True RMS ideal for use in tight areas, such an excellent companion to all DMMs. instrument. as breaker panels, controller panels, or outlets The Model MN103 provides a voltage The Model MN103 permits very low output proportional to measured AC current measurements. Measurements from 1mA to 100AAC Excellent companion to all DMMs. Permits very low AC current measurements Applications Electrical utility HVAC Industrial maintenance Laboratory Plant maintenance AC Current Probe Model MN103 (pdf) 10/05 Rev. 04 Technical Assistance (800) 343-1391 www.aemc.com 1 of 4Specifications MODELS MN103 ELECTRICAL Nominal Range 100A Measurement Range 1mA to 10A/ 1A to 100A Transformation Ratio Voltage output Output Signal 1mV/mA/1mVAC/AAC Accuracy (10A Range) 1mA to 10A 45 to 65Hz: 3% of Reading 1mA 1mA to 10A 65 to 500Hz: -2, +6% of Reading 1mA Phase Shift (10A Range) Accuracy (100A Range) 1 to 100A 40Hz to 3kHz 45 to 65Hz: 2% of Reading 0.1A 65 to 500Hz: +3% of Reading 0.1A Phase Shift (100A Range) 1 to 100A Overload Frequency Range 45 to 1000Hz Load Impedance 100k min Working/Common 250VAC Mode Voltage Output Termination 5 ft Lead MECHANICAL Operating Temperature 14 to 122F (-10 to 50C) Storage Temperature -40 to 176F (-40 to 80C) Operating Relative 10 to 35C 85% RH (without roll-off above 35C) Humidity Jaw Opening 0.78 (20mm) Maximum Conductor Size 0.47 max (12mm) Dimensions 1.26 x 4.53 x 0.87 (32 x 115 x 22mm) Weight 5.6 oz (160g) Polycarbonate Material Handles 10% fiberglass charged polycarbonate UL94 VO SAFETY Electrical 250V working voltage, 250V max common mode between output and ground, 3kV 50/60Hz dielectric for 1mm Note: Reference conditions: 23C 3K, 20 to 70%RH, external magnetic field <40A/m, no DC component, no external current carrying conductor, test sample centered, load impedance 1M. AC Current Probe Model MN103 (pdf) 10/05 Rev. 04 Technical Assistance (800) 343-1391 www.aemc.com 2 of 4