TNPU1206511RBZEN00

TNPU e3 www.vishay.com Vishay Draloric Ultra Precision Thin Film Chip Resistors FEATURES Low temperature coefficients and tight tolerances Sulfur resistance verified according to ASTM B 809 Superior moisture resistivity (85 C; 85 % RH) Excellent overall stability at different environmental conditions, e.g. 0.05 % (1000 h rated power at 70 C) AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS TNPU e3 ultra precision thin film flat chip resistors combine the proven reliability of TNPW e3 products with a most Automotive advanced level of precision and stability. This unique Industrial equipment combination makes the product perfectly suited for all applications with outstanding requirements towards size, Test and measuring equipment reliable precision and stability. Medical equipment Telecommunication Instrumentation TECHNICAL SPECIFICATIONS DESCRIPTION TNPU0402 e3 TNPU0603 e3 TNPU0805 e3 TNPU1206 e3 Imperial size 0402 0603 0805 1206 Metric size code RR1005M RR1608M RR2012M RR3216M Resistance range 100 to 100 k 100 to 100 k 100 to 332 k 100 to 511 k Resistance tolerance 0.1 %; 0.05 % 0.1 %; 0.05 %; 0.02 % Temperature coefficient 10 ppm/K; 5 ppm/K 10 ppm/K; 5 ppm/K; 2 ppm/K (1) Rated dissipation, P 0.063 W 0.1 W 0.125 W 0.25 W 70 Operating voltage, U AC /DC 50 V 75 V 150 V 200 V max. RMS (1) Permissible film temperature, 125 C F max. Operating temperature range -55 C to 125 C (1) Internal thermal resistance 90 K/W 63 K/W 38 K/W 32 K/W Permissible voltage against ambient (insulation): 1 min; U 75 V 100 V 200 V 300 V ins -9 FIT 0.1 x 10 /h observed Note (1) Please refer to APPLICATION INFORMATION, see below APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. Please consider the application note Thermal Management in Surface-Mounted Resistor Applications (www.vishay.com/doc?28844) for information on the general nature of thermal resistance. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 09-Jan-2020 Document Number: 28779 1 For technical questions, contact: thinfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TNPU e3 www.vishay.com Vishay Draloric MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION OPERATION MODE STANDARD TNPU0402 e3 0.063 W TNPU0603 e3 0.100 W Rated dissipation, P 70 TNPU0805 e3 0.125 W TNPU1206 e3 0.250 W Operating temperature range -55 C to 125 C Permissible film temperature, 125 C F max. TNPU0402 e3 100 to 100 k TNPU0603 e3 100 to 100 k TNPU0805 e3 100 to 332 k Max. resistance change at P for resistance range, 70 TNPU1206 e3 100 to 511 k | R/R| after: 1000 h 0.05 % 8000 h 0.1 % 225 000 h 0.3 % TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES 10 ppm/K 0.05 % TNPU0402 e3 0.1 % 100 to 100 k 5 ppm/K 0.05 % 10 ppm/K 0.05 % 0.1 % 100 to 100 k 5 ppm/K 0.05 % TNPU0603 e3 0.02 % 0.1 % 2 ppm/K 0.05 % 500 to 20 k 0.02 % 10 ppm/K 0.05 % 0.1 % 100 to 332 k E24; E192 5 ppm/K 0.05 % TNPU0805 e3 0.02 % 100 to 200 k 0.1 % 2 ppm/K 0.05 % 500 to 20 k 0.02 % 10 ppm/K 0.05 % 0.1 % 100 to 511 k 5 ppm/K 0.05 % TNPU1206 e3 0.02 % 100 to 200 k 0.1 % 2 ppm/K 0.05 % 500 to 20 k 0.02 % Revision: 09-Jan-2020 Document Number: 28779 2 For technical questions, contact: thinfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000