USB-2405

USB-2405 Series 2 or 4-ch 24-bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module Features Hi-Speed USB 2.0 USB bus powered 24-bit Sigma-Delta ADC with built-in anti-aliasing filter 2 or 4-ch simultaneous sampling analog inputs, up to 128kS/s AC or DC input coupling, software selectable Analog or digital triggering Supports 2mA excitation output on each analog input channel USB-2405/S for IEPE sensor measurement Full auto-calibration USB-2405/2AI Introduction Software Utility The USB-2405 is a 24-bit high-performance dynamic signal ADLINK Connection Explorer (ACE) acquisition USB module equipped with 2 or 4 analog input channels Device management utility providing simultaneous sampling at up to 128 kS/s per channel. (Install MAPS Core from driver download) The USB-2405 also features software-selectable AC or DC coupling U-Test input configuration and built-in high precision 2 mA excitation Ready-to-use functional testing utility current to measure integrated electronic piezoelectric (IEPE) Phoenix GM Lite (Orderable) sensors such as accelerometers and microphones. Machine Condition Monitoring Software (Supported by model USB-2405 and USB-2405/OEM) The USB-2405 delivers high precision, DC and dynamic measurement performance with very low temperature drift. The onboard 24-bit Sigma-Delta ADC supports anti-aliasing filtering, Ordering Information suppressing modulator and signal out-of-band noise and providing usable signal bandwidth of the Nyquist rate, making it ideal for USB-2405/S high dynamic range signal measurement in vibration and acoustic 4-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module applications. USB-2405/2AI 2-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module The USB-2405 supports digital and analog trigger sources and USB-2405/OEM flexible trigger modes, including post, delay, middle, gated, and pre-triggering for efficient data acquisition with no need for post- 4-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module, processing. The USB-2405 is USB bus-powered and equipped with OEM board-level version, no enclosure BNC connectors and removable spring terminals for easy device connectivity. Standard Shipped Accessories 4-pin removable spring terminal Driver and SDK 2 m USB Type A to USB Mini-B cable with lockable connector MAPS Core, LabVIEW, C/C++, Visual Studio.NET Module stand Rail-mount kit Supported Operating System Optional Accessories Windows 7/10 Linux Phoenix GM Lite (Supported by model USB-2405 and USB- 2405/OEM) License Key for Phoenix GM Lite ICP Accelerometer IMI 603C01 ICP Accelerometer IMI 603C01, 100mV/g, 0.5 to 10kHz, 2-pin conn. w/ 10-ft cable and magnetic mount Bandwidth Product Illustration -3dB bandwidth 0.49 * sampling rate AC cut-off frequency (-3dB) 0.4 Hz AC cut-off frequency (-0.1dB) 2.4 Hz AI 3 Flatness DGND AI 2 DGND Input Signal Frequency (fin) Flatness GPIO 1 20 Hz to 20 kHz 0.01 dB AI 1 GPIO 1 AI 1 20 Hz to 46.4 kHz 0.15 dB GDND GDND AI 0 AI 0 Crosstalk GPIO 0 GPIO 0 Input Signal Frequency (f ) Crosstalk in 1 kHz -102 dB USB-2405/S USB-2405/2AI 46.4 kHz -95 dB System noise Specifications Mode AI Noise Analog Input High-Resolution (< 52.734 kHz) 50Vrms High-Speed Mode 65Vrms (52.734 kHz to 128 kHz) Channels 2 or 4 (simultaneous sampling) ADC Resolution 24-bit SFDR (Vin = -1 dBFS) ADC type Delta-sigma Input Signal Frequency (fin) SFDR Sampling rate 1 kS/s to 128 kS/s 1 kHz 104 dB Input range 10V Dynamic Range (Vin = -60 dBFS, fs=102.4kS/s) FIFO buffer size 8kS across all channel Input Configuration Differential or pseudo-differential Input Signal Frequency (fin) Dynamic range 200 k (between positive input and 1 kHz 100 dB Input impedance negative input) 16.93 k (Between negative input and chassis ground) Digital Input / Output Input coupling AC or DC, software selectable Integrated Electronic Current: 2 mA or 0 mA, software Channels 2 programmable function I/O Piezoelectric (IEPE) selectable IEPE compliance: 24V Compatibility 3.3V / TTL (single-ended) Over-voltage 60V Initial status Input (pull low) protection Logic low: VIL = 0.8 V max IIL = 0.2 mA max. Input common Input voltage 10V Logic high: VIH = 2.0 V min. IIH = 0.2 mA max. mode range Logic low: VOL = 0.8 V max IIL = 0.2 mA max. Trigger source Analog or digital, software selectable Output voltage Logic high: VOH = 2.0 V min. IIH = 24 mA max. Post trigger, delay trigger, middle Over-voltage Trigger mode trigger, gated trigger, pre-trigger, -2V ~ +7V protection post or delay trigger with re-triggering Static digital input/output Programmed I/O, continuous (bulk Data Transfer Pulse output, max. frequency:4 MHz transfer mode) Event counter, max. Supporting modes DC accuracy (25C) frequency: 4MHz Digital trigger IN Offset Error (mV) Gain Error (%) Synchronization sample clock IN Typical: 0.15mV Typical: 0.15% Data Transfer Programmed I/O Max. 0.3mV Max. 0.3% Note: Function I/O shares the same I/O pins, such that only one of these modes can be selected at a time. AC Dynamic Performance (typical, 25C) THD, THD+N (Vin = 8.9 Vpk) General Specifications I/O connector: Two or four BNC connectors and 4-pin removable Input Input Signal THD THD+N configuration Frequency (fin) spring terminals 20 Hz to 20 kHz -94 dB -91 dB Operating temperature: 0 to 55C (32 to 131F) Differential 20 Hz to 46.4 kHz -89 dB -88 dB Storage temperature:-20 to 70C (-4 to 158F) 20 Hz to 20 kHz -92 dB -88 dB Power requirements: 5V 400mA (USB bus powered) Pseudodifferential 20 Hz to 46.4 kHz -85 dB -85 dB Dimensions (not including stand): CMRR 114 mm (W) x 167.5 mm (D) x 41.3 mm (H) (4.5 x 6.6 x 1.63) Relative humidity: 5% to 95%, non-condensing AC (20 Hz to 1 kHz) 60 dB www.adlinktech.com All products and company names listed are trademarks or trade names of their respective companies. Updated Dec. 29, 2020. 2020 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.