209M420-19B

ASSY USED ON: WHEN L MODIFICATION IS SPECIFIED, COUPLING NUT SHALL HAVE 3 LOCK WIRE HOLES, 120 APART 6 CODE 40 - HEAT SHRINK BOOT BACKSHELL 209M412-19B-DL SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 MODIFICATION CODE REFER TO CH00-0250-004 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-209M412-19B). 4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER S OPTION. 5. BACKSHELL MATES TO MIL-C-38999 SERIES III & IV, CLASS C, F, K AND W, D38999/20, /24, /26, /40, /46, /47 CONNECTORS AND WHEN SO MATED PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PAR. 3.5.7. 6. WHEN L MODIFICATION IS SPECIFIED, COUPLING NUT SHALL HAVE 3 LOCK WIRE HOLES, 120 APART. 7. THIS IS A FUNCTIONAL EQUIVALENT OF MIL-C-85049/69 8. WHEN GROUNDING SCREW MODIFICATION IS ORDERED 18,50 MAX BECOMES 27,20 MAX AND 25,50 MAX BECOMES 34,20 MAX DATE 3RD ANGLE W.RUST DRAWN PROJECTION TITLE: 11/09/2015 NOT TO CHECKED 11/09/2015 SCALE HEAT SHRINK BOOT BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 11/09/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 15/10/2015 ANGULAR +/- 1 REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-39888 SERIES III & IV H 19/02/15 H.SMITH REVISED PER ECO-15-002406 J REVISED PER ECO-15-013980 15/10/2015 H.SMITH TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 209M4XX J 1 POLAMCO/TE CAGE CODE: U5792ASSY USED ON: WHEN L MODIFICATION IS SPECIFIED, COUPLING NUT SHALL HAVE 3 LOCK WIRE HOLES, 120 APART MEDIUM DIAMOND KNURL 25,50 MAX 8 18,50 MAX 8 A-A 10,50 A SILICONE O-RING 3,50 4 DRAIN HOLES WHEN D MODIFICATION IS SPECIFIED PART MARK HERE A TABLE 1 BASE ORDER.NO. SHELL SIZE A B X Y Z PART +0,20/-0,00 5 COM L / MIL THREAD MAX MAX MIN NUMBER 209M408 08 9 / A M12 1.0 18,0 1,12 13,50 6,80 209M410 10 11 / B M15 1.0 21,0 1,12 15,40 10,30 24,5 1,12 19,70 13,60 209M412 12 13 / C M18 1.0 209M414 14 15 / D M22 1.0 29,0 1,12 21,30 16,30 32,5 1,12 24,50 19,50 209M416 16 17 / E M25 1.0 209M418 18 19 / F M28 1.0 35,5 1,12 26,50 21,90 37,0 1,75 31,00 25,20 209M420 20 21 / G M31 1.0 209M422 22 23 / H M34 1.0 40,0 1,75 34,40 28,30 209M424 24 25 / J M37 1.0 43,5 1,75 36,60 31,50 DATE 3RD ANGLE W.RUST DRAWN PROJECTION TITLE: 11/09/2015 NOT TO CHECKED 11/09/2015 SCALE HEAT SHRINK BOOT BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 11/09/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 15/10/2015 ANGULAR +/- 1 REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-39888 SERIES III & IV H 19/02/15 H.SMITH REVISED PER ECO-15-002406 J REVISED PER ECO-15-013980 15/10/2015 H.SMITH TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 209M4XX J 2 POLAMCO/TE CAGE CODE: U5792 B A THRAED XXXX Z X Y