OPB829AZ

Slotted Optical Switch OPB827, OPB828, OPB829Z Series Features: OPB827 OPB828 0.125 (3.18 mm) wide, 0.215 (5.46 mm) deep slot 0.305 (7.75 mm) lead spacing (OPB827) Product Photo Here 0.220 (5.59 mm) lead spacing (OPB828) 24-inch 26 AWG wire leads (OPB829) Inexpensive plastic housing OPB829Z Description: Each OPB827, OPB828 and OPB829 device consists of an infrared emitting diode (LED, 890 nm center wavelength) and a NPN silicon phototransistor, mounted on opposite sides of a 0.125 (3.18 mm) wide slot in a low-cost black plastic housing. A variety of aperture sizes are offered (see chart below). The OPB927 and OPB828 are designed for PCBoard mounting with a minimum lead length of 0.35 (8.9 mm) while the OPB829Z (wire version) has 24-inch 26 AWG wire leads. Phototransistor switching occurs when an opaque object passes through the slot. The OPB827 is offered with 0.305 (7.75 mm) and the OPB828 is offered with 0.220 (5.59 mm) lead spacing for PCBoard mounting. The OPB829Z has 24 (61 cm) 26 AWG wire leads for remote mounting. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: Non-contact object sensing Slot Width/ Aperture Wire Lead Part Number Depth Housing Emitter/Sensor Length / Spacing Assembly line automation Machine automation OPB827A None IR Transmissive Equipment safety OPB827B None / 0.01 Machine safety 0.120 / 0.315 0.425 / 0.300 OPB827C None / 0.06 Opaque OPB827D None / 0.01 None OPB828A IR Transmissive OPB828B None / 0.01 0.120 / 0.315 0.425 / 0.220 OPB828C None / 0.06 Opaque None / 0.01 OPB828D OPB829AZ None IR Transmissive None / 0.01 OPB829BZ 0.125 / 0.315 24 / 26 AWG Wire OPB829CZ None / 0.06 Opaque OPB829DZ None / 0.01 CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEKs molded plastics. Applies to: OPB360, OPB370, OPB380, OPB390 and OPB860, OPB870, OPB880, OPB890. RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue B 01/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 5 Slotted Optical Switch OPB827, OPB828, OPB829Z Series OPB827 and OPB828 Series OPB829Z Series MILLIMETERS DIMENSIONS ARE IN: INCHES 2 3 1 4 Color/Pin Description Color/Pin Description Black-2 Cathode White-3 Collector Red-1 Anode Green-4 Emitter Lead Spacing OPB829 = OPB827 = 0.305 OPB828 = 0.220 24 26 AWG Wires OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 01/2012 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 5 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com