Product Information

OKI-78SR-5/1.5-W36E-C

Product Image X-ON

Module DC-DC 12VIN 1-OUT 5V 1.5A 7.5W 3-Pin
Manufacturer: Murata


Price (Ex GST)

From 9.8057

219 - Global Stock
Ships to you between
Wed. 02 Dec to Fri. 04 Dec
MOQ: 1 Multiples:
Pack Size :   1
Availability Price Quantity
214 - Global Stock


Ships to you between Wed. 02 Dec to Fri. 04 Dec
Calender

MOQ : 1
Multiples : 1
1 : $ 13.9071
5 : $ 10.0286
10 : $ 9.9429
25 : $ 9.8057

Buy
         
Manufacturer
Murata
Product Category
Isolated DC/DC Converters
Category
Isolated Dc/Dc Converters
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
Stock Image OKI-T/36W-W40N-C
Non-Isolated DC/DC Converters 36W 5.021-15.5Vout 3A 24Vin NegPolarity
Stock : 500
Stock Image OKI-T/36W-W40P-C
Non-Isolated DC/DC Converters 36W 5.021-15.5Vout 3A 24Vin PosPolarity
Stock : 607
Stock Image OKI-T/3-W40N-C
Non-Isolated DC/DC Converters 24Vin .75-5.5Vout 3A 15W Neg Polarity SMT
Stock : 1806
Stock Image OKI-78SR-51.5-W36H-C
Murata Power Solutions Non-Isolated DCDC Converters 7.5W 24V 5Vout 1.5A Horizontal Mount
Stock : 2633
Stock Image OKI-T/3-W32P-C
Module DC-DC 24VIN 1-OUT 0.7525V to 4.5V 3A 13.5W 5-Pin SMT T/R
Stock : 250
Stock Image OKI-T/3-W40P-C
Non-Isolated DC/DC Converters 24Vin 0.75-5.5Vout3A 15W Pos Polarity SMT
Stock : 4
Stock Image OKI-78SR-5/1.5-W36H-C
Non-Isolated DCDC Converters 7.5W 24V 5Vout 1.5A Horizontal Mount
Stock : 221
Image Description
Stock Image REC5-2412SRWZ/H2/A
Isolated DC/DC Converters 5W DC/DC 2kV REG 4:1 9-36Vin 12Vout
Stock : 15
Stock Image CC15-2405SRH-E
Isolated DC/DC Converters 15W 5V 3A
Stock : 9
Stock Image VI-N53-CM
Isolated DC/DC Converters VI-N53-CM 150V/24V 600W
Stock : 3
Stock Image STMGFS302415
Isolated DC/DC Converters Valued added PS
Stock : 2
Stock Image SUS34805BP
Isolated DC/DC Converters 3W 5V 0.6A SMD/SMT
Stock : 1
Stock Image REC6-0505SRW/R10/C
Isolated DC/DC Converters 6W DC/DC 10kV REG 5Vin 5Vout
Stock : 19
Stock Image CBS2002412-F6
Isolated DC/DC Converters 200W 12V 16.7A SMD/SMT - HALF BRICK
Stock : 3
Stock Image AEE01BB12-M
Isolated DC/DC Converters 15W 9-18in +/-12Vout 625mA Med
Stock : 10
Stock Image RP12-4812SAW
Isolated DC/DC Converters 12W DC/DC 1.6kV REG 4:1 18-75Vin 12Vout
Stock : 9
Stock Image TMR 3-4811E
Isolated DC/DC Converters Product Type: DC/DC; Package Style: SIP-8; Output Power (W): 3; Input Voltage: 36-75 VDC; Output 1 (Vdc): 5; Output 2 (Vdc): N/A; Output 3 (Vdc): N/A
Stock : 8

OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input IOUT R/N (mVp-p) Regulation (Typ.) IIN, IIN, Efficiency VOUT (Amps Power VIN Nom. Range no load full load Package Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Inches (mm) 0.47 x 0.40 x 0.69 OKI-78SR-3.3/1.5-W36E-C 3.3 1.5 4.95 40 ?0.30% ?0.40% 12 7-36 5 0.48 84% 85.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-5/1.5-W36E-C 5 1.5 7.5 75 ?0.30% ?0.40% 12 7-36 5 0.69 89% 90.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-12/1.0-W36E-C 12 1.0 12 75 ?0.25% ?0.25% 24 15-36 5 0.53 93.5% 95.3% (11.9 x 10.0 x 17.6) NOTE: All specifications are at nominal line voltage, Vout = nominal and full load, +25?C.with no external capacitor, unless otherwise noted. NOTE: Please click here to view the data sheet for the OKI-78SR ?Open-frame? series. www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 2 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input IOUT R/N (mVp-p) Regulation (Typ.) IIN, IIN, Efficiency VOUT (Amps Power VIN Nom. Range no load full load Package Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Inches (mm) 0.47 x 0.40 x 0.69 OKI-78SR-3.3/1.5-W36E-C 3.3 1.5 4.95 40 ?0.30% ?0.40% 12 7-36 5 0.48 84% 85.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-5/1.5-W36E-C 5 1.5 7.5 75 ?0.30% ?0.40% 12 7-36 5 0.69 89% 90.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-12/1.0-W36E-C 12 1.0 12 75 ?0.25% ?0.25% 24 15-36 5 0.53 93.5% 95.3% (11.9 x 10.0 x 17.6) NOTE: All specifications are at nominal line voltage, Vout = nominal and full load, +25?C.with no external capacitor, unless otherwise noted. NOTE: Please click here to view the data sheet for the OKI-78SR ?Open-frame? series. www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 2 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS ? OKI-78SR-3.3/1.5-W36E-C ABSOLUTE MAXIMUM RATINGS Minimum Typical/Nominal Maximum Units Conditions ? Full power operation 0 36 Vdc Input Voltage, Continuous Input Reverse Polarity None, install external fuse None Vdc Output Power 0 5.15 W Output Current Current-limited, no damage, short-circuit protected 0 1.5 A Storage Temperature Range Vin = Zero (no power) -55 125 ?C Absolute maximums are stress ratings. Exposure of devices to greater than any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Speci?cations Table is not implied or recommended. INPUT Operating voltage range 7 12 36 Vdc Recommended External Fuse Fast blow 2 A None, install external fuse None Vdc Reverse Polarity Protection ? Internal Filter Type C-TYPE Input current Full Load Conditions 0.48 0.51 A Vin = nominal Low Line Vin @ min 0.80 0.85 A 2 Inrush Transient 0.16 A -Sec. Short Circuit Input Current 5 mA No Load Input Current Vin = nominal 5 10 mA Shut-Down Mode Input Current 1 mA (Cin = 2 X 100uF, CBus = 1000uF, LBus = 1uH) 50 mA, pk-pk Re?ected (back) ripple current ? GENERAL and SAFETY @ Vin nom, 3.3Vout 83.7 85.5 % Efficiency @ Vin min, 3.3Vout 87.0 88.4 % Certi?ed to UL-60950-1, IEC/EN60950-1, Safety Yes 2nd Edition Per Telcordia SR332, issue 1, class 3, ground 6 78.7 Hours x 10 Calculated MTBF ? ?xed, Tambient=+25?C DYNAMIC CHARACTERISTICS Fixed Switching Frequency 500 kHz 50-100-50% load step, settling time to within Dynamic Load Response 25 50 ?Sec ?2% of Vout di/dt =1A/?Sec Dynamic Load Peak Deviation same as above 100 150 mV www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 3 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input IOUT R/N (mVp-p) Regulation (Typ.) IIN, IIN, Efficiency VOUT (Amps Power VIN Nom. Range no load full load Package Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Inches (mm) 0.47 x 0.40 x 0.69 OKI-78SR-3.3/1.5-W36E-C 3.3 1.5 4.95 40 ?0.30% ?0.40% 12 7-36 5 0.48 84% 85.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-5/1.5-W36E-C 5 1.5 7.5 75 ?0.30% ?0.40% 12 7-36 5 0.69 89% 90.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-12/1.0-W36E-C 12 1.0 12 75 ?0.25% ?0.25% 24 15-36 5 0.53 93.5% 95.3% (11.9 x 10.0 x 17.6) NOTE: All specifications are at nominal line voltage, Vout = nominal and full load, +25?C.with no external capacitor, unless otherwise noted. NOTE: Please click here to view the data sheet for the OKI-78SR ?Open-frame? series. www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 2 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input IOUT R/N (mVp-p) Regulation (Typ.) IIN, IIN, Efficiency VOUT (Amps Power VIN Nom. Range no load full load Package Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Inches (mm) 0.47 x 0.40 x 0.69 OKI-78SR-3.3/1.5-W36E-C 3.3 1.5 4.95 40 ?0.30% ?0.40% 12 7-36 5 0.48 84% 85.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-5/1.5-W36E-C 5 1.5 7.5 75 ?0.30% ?0.40% 12 7-36 5 0.69 89% 90.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-12/1.0-W36E-C 12 1.0 12 75 ?0.25% ?0.25% 24 15-36 5 0.53 93.5% 95.3% (11.9 x 10.0 x 17.6) NOTE: All specifications are at nominal line voltage, Vout = nominal and full load, +25?C.with no external capacitor, unless otherwise noted. NOTE: Please click here to view the data sheet for the OKI-78SR ?Open-frame? series. www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 2 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS ? OKI-78SR-3.3/1.5-W36E-C ABSOLUTE MAXIMUM RATINGS Minimum Typical/Nominal Maximum Units Conditions ? Full power operation 0 36 Vdc Input Voltage, Continuous Input Reverse Polarity None, install external fuse None Vdc Output Power 0 5.15 W Output Current Current-limited, no damage, short-circuit protected 0 1.5 A Storage Temperature Range Vin = Zero (no power) -55 125 ?C Absolute maximums are stress ratings. Exposure of devices to greater than any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Speci?cations Table is not implied or recommended. INPUT Operating voltage range 7 12 36 Vdc Recommended External Fuse Fast blow 2 A None, install external fuse None Vdc Reverse Polarity Protection ? Internal Filter Type C-TYPE Input current Full Load Conditions 0.48 0.51 A Vin = nominal Low Line Vin @ min 0.80 0.85 A 2 Inrush Transient 0.16 A -Sec. Short Circuit Input Current 5 mA No Load Input Current Vin = nominal 5 10 mA Shut-Down Mode Input Current 1 mA (Cin = 2 X 100uF, CBus = 1000uF, LBus = 1uH) 50 mA, pk-pk Re?ected (back) ripple current ? GENERAL and SAFETY @ Vin nom, 3.3Vout 83.7 85.5 % Efficiency @ Vin min, 3.3Vout 87.0 88.4 % Certi?ed to UL-60950-1, IEC/EN60950-1, Safety Yes 2nd Edition Per Telcordia SR332, issue 1, class 3, ground 6 78.7 Hours x 10 Calculated MTBF ? ?xed, Tambient=+25?C DYNAMIC CHARACTERISTICS Fixed Switching Frequency 500 kHz 50-100-50% load step, settling time to within Dynamic Load Response 25 50 ?Sec ?2% of Vout di/dt =1A/?Sec Dynamic Load Peak Deviation same as above 100 150 mV www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 3 of 20

Customer Comments  

Log in or register to post comments.

Customer Reviews

No reviews yet.