Product Information

MICRF219A-433-EV

Product Image X-ON

RF Development Tools
Manufacturer: Microchip


Price (Ex GST)

From 74.36

MOQ: 1 Multiples:
Pack Size :   1
Availability Price Quantity
0 - Global Stock


Ships to you between Fri. 11 Dec to Thu. 17 Dec
Calender

MOQ : 1
Multiples : 1
1 : $ 79.6148

Buy
0 - Global Stock


Ships to you between Fri. 11 Dec to Thu. 17 Dec
Calender

MOQ : 1
Multiples : 1
1 : $ 74.36

Buy
         
Manufacturer
Microchip
Product Category
RF Development Tools
RoHS - XON
Y Icon ROHS
Product
Evaluation Boards
Type
Rf Receivers
Tool Is For Evaluation Of
Micrf219a
Frequency
433 Mhz
Operating Supply Voltage
3.3 V
Description/Function
Evaluation Board For The Micrf219a Ask/Ook Receiver
Packaging
Bulk
Brand
Microchip Technology / Micrel
Interface Type
Serial
For Use With
Micrf219a
Maximum Operating Temperature
+105 C
Minimum Operating Temperature
- 40 C
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
Stock Image MICRF229YQS
Integrated circuit: RF receiver; serial, transparent; QSOP16
Stock : 362
Stock Image MICRF220AYQS
RF Receiver 300MHz to 450MHz, 3.0V to 3.6V, 6mA, <10kbps ASK Receiver with RSSI and Shutdown
Stock : 80
Stock Image MICRF221AYQS
Integrated circuit: RF receiver; serial, transparent; QSOP16
Stock : 185
Stock Image MICRF219AAYQS-TR
RF Receiver
Stock : 2434
Stock Image MICRF219AAYQS
Integrated circuit: RF receiver; serial, transparent; QSOP16
Stock : 464
Stock Image MICRF219AYQS
Integrated circuit: RF receiver; serial, transparent; QSOP16
Stock : 196
Stock Image MICRF221AYQS-TR
RF Receiver 850MHz to 950MHz 3.0V to 3.6V 9mA 10kbps ASK Recdeiver with Auto-Poll and RSS
Stock : 96
Image Description
Stock Image ATR0610-EK1
RF Development Tools COM-GPS ANTARIS4 LNA Evaluation Board
Stock : 2
Stock Image ATR2406-DEV-BOARD
RF Development Tools COM-RADIO MODULE ISM 2.4GHZ TRX
Stock : 1
Stock Image AS3933 DEV SYSTEM
RF Development Tools AS3933 Demo Board 3D Wakeup 125kHz
Stock : 8

MICRF219A 300MHz to 450MHz ASK/OOK Receiver with Auto-Poll, and RSSI General Description Features The MICRF219A is a 300MHz to 450MHz super- ? ?110dBm sensitivity at 1kbps with 0.1% BER heterodyne, image-reject, RF receiver with automatic gain ? Auto-polling mode with bit checking control, ASK/OOK demodulator, and analog RSSI output. ? Supports bit rates up to 20kbps at 433.92MHz It only requires a crystal and a minimum number of ? 25dB image-reject mixer external components to implement. The MICRF219A is ideal for low-cost, low-power, RKE, TPMS, and remote ? No IF filter required actuation applications. ? 60dB analog RSSI output range The MICRF219A achieves ?110dBm sensitivity at a bit ? 3.0V to 3.6V supply voltage range rate of 1kbps with 0.1% BER. Four demodulator filter ? 4.3mA supply current at 315MHz bandwidths are selectable in binary steps from 1625Hz to ? 6.0mA supply current at 434MHz 13kHz at 433.92MHz, allowing the device to support bit ? 13?A supply current in sleep mode rates up to 20kbps. The device operates from a supply voltage of 3.0V to 3.6V, and typically consumes 4.3mA of ? 0.1?A supply current in shutdown mode supply current at 315MHz and 6.0mA at 433.92MHz. A ? 16-pin QSOP package (4.9mm x 6.0mm) shutdown mode reduces supply current to 0.1?A typical. ? ?40?C to +105 ?C temperature range ? 3kV HBM ESD Rating Datasheets and support documentation can be found on Micrel?s website at: www.micrel.com. _________________________________________________________________________________________________________________________ Typical Application MICRF219A Typical Application Circuit (433.92MHz, 1kbps) Micrel Inc. ? 2180 Fortune Drive ? San Jose, CA 95131 ? USA ? tel +1 (408) 944-0800 ? fax + 1 (408) 474-1000 ? http://www.micrel.com August 12, 2015 Revision 3.0 RadioTech@micrel.com or (408) 944-0800 MICRF219A 300MHz to 450MHz ASK/OOK Receiver with Auto-Poll, and RSSI General Description Features The MICRF219A is a 300MHz to 450MHz super- ? ?110dBm sensitivity at 1kbps with 0.1% BER heterodyne, image-reject, RF receiver with automatic gain ? Auto-polling mode with bit checking control, ASK/OOK demodulator, and analog RSSI output. ? Supports bit rates up to 20kbps at 433.92MHz It only requires a crystal and a minimum number of ? 25dB image-reject mixer external components to implement. The MICRF219A is ideal for low-cost, low-power, RKE, TPMS, and remote ? No IF filter required actuation applications. ? 60dB analog RSSI output range The MICRF219A achieves -110dBm sensitivity at a bit ? 3.0V to 3.6V supply voltage range rate of 1kbps with 0.1% BER. Four demodulator filter ? 4.3mA supply current at 315MHz bandwidths are selectable in binary steps from 1625Hz to ? 6.0mA supply current at 434MHz 13kHz at 433.92MHz, allowing the device to support bit ? 13?A supply current in sleep mode rates up to 20kbps. The device operates from a supply voltage of 3.0V to 3.6V, and typically consumes 4.3mA of ? 0.1?A supply current in shutdown mode supply current at 315MHz and 6.0mA at 433.92MHz. A ? 16-pin QSOP package (4.9mm x 6.0mm) shutdown mode reduces supply current to 0.1?A typical. ? -40?C to +105 ?C temperature range ? 3kV HBM ESD Rating Datasheets and support documentation can be found on Micrel?s website at: www.micrel.com. _________________________________________________________________________________________________________________________ Typical Application MICRF219A Typical Application Circuit (433.92MHz, 1kbps) Micrel Inc. ? 2180 Fortune Drive ? San Jose, CA 95131 ? USA ? tel +1 (408) 944-0800 ? fax + 1 (408) 474-1000 ? http://www.micrel.com August 12, 2015 Revision 3.0 RadioTech@micrel.com or (408) 944-0800 Micrel, Inc. MICRF219A Ordering Information Part Number Temperature Range Package MICRF219AAYQS ?40 ?C to +105 ?C 16-Pin QSOP Pin Configuration MICRF219AAYQS Pin Description Pin Pin Pin Function Number Name Reference resonator connection to the Pierce oscillator. May also be driven by external reference signal of 1 RO1 200mVp-p to 1.5V p-p amplitude maximum. Internal capacitance of 7pF to GND during normal operation. 2 GNDRF Ground connection for ANT RF input. Connect to PCB ground plane. Antenna Input: RF Signal Input from Antenna. Internally AC coupled. It is recommended to use a matching 3 ANT network with an inductor to RF ground to improve ESD protection. 4 GNDRF Ground connection for ANT RF input. Connect to PCB ground plane. Positive supply connection for all chip functions. Bypass with 0.1?F capacitor located as close to the VDD 5 VDD pin as possible. Squelch Control Logic-Level Input. An internal pull-up (5?A typical) pulls the logic-input HIGH when the 6 SQ device is enabled. This feature is not recommended in MICRF219A and this pin should remain floating. Tie this pin to VDD to ensure robust register programming. Use register bits D[4:3] to set demodulation 7 SEL0 bandwidth. Shutdown Control Logic-Level Input. A logic-level LOW enables the device. A logic-level HIGH places the device in low-power shutdown mode. An internal pull-up (5?A typical) pulls the logic input HIGH. To ensure 8 SHDN that the part starts up correctly, connect a 1?F capacitor from VDD to SHDN, and a 50k? resistor from SHDN pin to GND. After the supply voltage settles, apply a HIGH logic level voltage to SHDN to turn the part off, then a LOW logic level voltage to turn the part on before programming or operating the device. 9 GND Ground connection for all chip functions except for RF input. Connect to PCB ground plane. Data Output. Demodulated data output. A current limited CMOS output during normal operation, 25k? pull- 10 DO down is present when device is in shutdown. Tie this pin to VDD to ensure robust register programming. Use register bits D[4:3] to set demodulation 11 SEL1 bandwidth. Revision 3.0 August 12, 2015 2 RadioTech@micrel.com or (408) 944-0800 MICRF219A 300MHz to 450MHz ASK/OOK Receiver with Auto-Poll, and RSSI General Description Features The MICRF219A is a 300MHz to 450MHz super- ? ?110dBm sensitivity at 1kbps with 0.1% BER heterodyne, image-reject, RF receiver with automatic gain ? Auto-polling mode with bit checking control, ASK/OOK demodulator, and analog RSSI output. ? Supports bit rates up to 20kbps at 433.92MHz It only requires a crystal and a minimum number of ? 25dB image-reject mixer external components to implement. The MICRF219A is ideal for low-cost, low-power, RKE, TPMS, and remote ? No IF filter required actuation applications. ? 60dB analog RSSI output range The MICRF219A achieves -110dBm sensitivity at a bit ? 3.0V to 3.6V supply voltage range rate of 1kbps with 0.1% BER. Four demodulator filter ? 4.3mA supply current at 315MHz bandwidths are selectable in binary steps from 1625Hz to ? 6.0mA supply current at 434MHz 13kHz at 433.92MHz, allowing the device to support bit ? 13?A supply current in sleep mode rates up to 20kbps. The device operates from a supply voltage of 3.0V to 3.6V, and typically consumes 4.3mA of ? 0.1?A supply current in shutdown mode supply current at 315MHz and 6.0mA at 433.92MHz. A ? 16-pin QSOP package (4.9mm x 6.0mm) shutdown mode reduces supply current to 0.1?A typical. ? -40?C to +105 ?C temperature range ? 3kV HBM ESD Rating Datasheets and support documentation can be found on Micrel?s website at: www.micrel.com. _________________________________________________________________________________________________________________________ Typical Application MICRF219A Typical Application Circuit (433.92MHz, 1kbps) Micrel Inc. ? 2180 Fortune Drive ? San Jose, CA 95131 ? USA ? tel +1 (408) 944-0800 ? fax + 1 (408) 474-1000 ? http://www.micrel.com August 12, 2015 Revision 3.0 RadioTech@micrel.com or (408) 944-0800 MICRF219A 300MHz to 450MHz ASK/OOK Receiver with Auto-Poll, and RSSI General Description Features The MICRF219A is a 300MHz to 450MHz super- ? ?110dBm sensitivity at 1kbps with 0.1% BER heterodyne, image-reject, RF receiver with automatic gain ? Auto-polling mode with bit checking control, ASK/OOK demodulator, and analog RSSI output. ? Supports bit rates up to 20kbps at 433.92MHz It only requires a crystal and a minimum number of ? 25dB image-reject mixer external components to implement. The MICRF219A is ideal for low-cost, low-power, RKE, TPMS, and remote ? No IF filter required actuation applications. ? 60dB analog RSSI output range The MICRF219A achieves -110dBm sensitivity at a bit ? 3.0V to 3.6V supply voltage range rate of 1kbps with 0.1% BER. Four demodulator filter ? 4.3mA supply current at 315MHz bandwidths are selectable in binary steps from 1625Hz to ? 6.0mA supply current at 434MHz 13kHz at 433.92MHz, allowing the device to support bit ? 13?A supply current in sleep mode rates up to 20kbps. The device operates from a supply voltage of 3.0V to 3.6V, and typically consumes 4.3mA of ? 0.1?A supply current in shutdown mode supply current at 315MHz and 6.0mA at 433.92MHz. A ? 16-pin QSOP package (4.9mm x 6.0mm) shutdown mode reduces supply current to 0.1?A typical. ? -40?C to +105 ?C temperature range ? 3kV HBM ESD Rating Datasheets and support documentation can be found on Micrel?s website at: www.micrel.com. _________________________________________________________________________________________________________________________ Typical Application MICRF219A Typical Application Circuit (433.92MHz, 1kbps) Micrel Inc. ? 2180 Fortune Drive ? San Jose, CA 95131 ? USA ? tel +1 (408) 944-0800 ? fax + 1 (408) 474-1000 ? http://www.micrel.com August 12, 2015 Revision 3.0 RadioTech@micrel.com or (408) 944-0800 Micrel, Inc. MICRF219A Ordering Information Part Number Temperature Range Package MICRF219AAYQS ?40 ?C to +105 ?C 16-Pin QSOP Pin Configuration MICRF219AAYQS Pin Description Pin Pin Pin Function Number Name Reference resonator connection to the Pierce oscillator. May also be driven by external reference signal of 1 RO1 200mVp-p to 1.5V p-p amplitude maximum. Internal capacitance of 7pF to GND during normal operation. 2 GNDRF Ground connection for ANT RF input. Connect to PCB ground plane. Antenna Input: RF Signal Input from Antenna. Internally AC coupled. It is recommended to use a matching 3 ANT network with an inductor to RF ground to improve ESD protection. 4 GNDRF Ground connection for ANT RF input. Connect to PCB ground plane. Positive supply connection for all chip functions. Bypass with 0.1?F capacitor located as close to the VDD 5 VDD pin as possible. Squelch Control Logic-Level Input. An internal pull-up (5?A typical) pulls the logic-input HIGH when the 6 SQ device is enabled. This feature is not recommended in MICRF219A and this pin should remain floating. Tie this pin to VDD to ensure robust register programming. Use register bits D[4:3] to set demodulation 7 SEL0 bandwidth. Shutdown Control Logic-Level Input. A logic-level LOW enables the device. A logic-level HIGH places the device in low-power shutdown mode. An internal pull-up (5?A typical) pulls the logic input HIGH. To ensure 8 SHDN that the part starts up correctly, connect a 1?F capacitor from VDD to SHDN, and a 50kO resistor from SHDN pin to GND. After the supply voltage settles, apply a HIGH logic level voltage to SHDN to turn the part off, then a LOW logic level voltage to turn the part on before programming or operating the device. 9 GND Ground connection for all chip functions except for RF input. Connect to PCB ground plane. Data Output. Demodulated data output. A current limited CMOS output during normal operation, 25kO pull- 10 DO down is present when device is in shutdown. Tie this pin to VDD to ensure robust register programming. Use register bits D[4:3] to set demodulation 11 SEL1 bandwidth. Revision 3.0 August 12, 2015 2 RadioTech@micrel.com or (408) 944-0800 Micrel, Inc. MICRF219A Pin Description (Continued) Pin Pin Pin Function Number Name Demodulation Threshold Voltage Integration Capacitor. Connect a 0.1?F capacitor from CTH pin to GND 12 CTH to provide a stable slicing threshold. AGC Filter Capacitor. Connect a capacitor from this pin to GND. Refer to the AGC Loop and CAGC 13 CAGC section for information on the capacitor value. Received Signal Strength Indicator. The voltage on this pin is an inversed amplified version of the voltage 14 RSSI on CAGC. Output is from a switched capacitor integrating op amp with 250? typical output impedance. 15 SCLK Programming clock input. Reference resonator connection to the Pierce oscillator. Internal capacitance of 7pF to GND during normal 16 RO2 operation. Revision 3.0 August 12, 2015 3 RadioTech@micrel.com or (408) 944-0800 MICRF219A 300MHz to 450MHz ASK/OOK Receiver with Auto-Poll, and RSSI General Description Features The MICRF219A is a 300MHz to 450MHz super- ? ?110dBm sensitivity at 1kbps with 0.1% BER heterodyne, image-reject, RF receiver with automatic gain ? Auto-polling mode with bit checking control, ASK/OOK demodulator, and analog RSSI output. ? Supports bit rates up to 20kbps at 433.92MHz It only requires a crystal and a minimum number of ? 25dB image-reject mixer external components to implement. The MICRF219A is ideal for low-cost, low-power, RKE, TPMS, and remote ? No IF filter required actuation applications. ? 60dB analog RSSI output range The MICRF219A achieves -110dBm sensitivity at a bit ? 3.0V to 3.6V supply voltage range rate of 1kbps with 0.1% BER. Four demodulator filter ? 4.3mA supply current at 315MHz bandwidths are selectable in binary steps from 1625Hz to ? 6.0mA supply current at 434MHz 13kHz at 433.92MHz, allowing the device to support bit ? 13?A supply current in sleep mode rates up to 20kbps. The device operates from a supply voltage of 3.0V to 3.6V, and typically consumes 4.3mA of ? 0.1?A supply current in shutdown mode supply current at 315MHz and 6.0mA at 433.92MHz. A ? 16-pin QSOP package (4.9mm x 6.0mm) shutdown mode reduces supply current to 0.1?A typical. ? -40?C to +105 ?C temperature range ? 3kV HBM ESD Rating Datasheets and support documentation can be found on Micrel?s website at: www.micrel.com. _________________________________________________________________________________________________________________________ Typical Application MICRF219A Typical Application Circuit (433.92MHz, 1kbps) Micrel Inc. ? 2180 Fortune Drive ? San Jose, CA 95131 ? USA ? tel +1 (408) 944-0800 ? fax + 1 (408) 474-1000 ? http://www.micrel.com August 12, 2015 Revision 3.0 RadioTech@micrel.com or (408) 944-0800 MICRF219A 300MHz to 450MHz ASK/OOK Receiver with Auto-Poll, and RSSI General Description Features The MICRF219A is a 300MHz to 450MHz super- ? ?110dBm sensitivity at 1kbps with 0.1% BER heterodyne, image-reject, RF receiver with automatic gain ? Auto-polling mode with bit checking control, ASK/OOK demodulator, and analog RSSI output. ? Supports bit rates up to 20kbps at 433.92MHz It only requires a crystal and a minimum number of ? 25dB image-reject mixer external components to implement. The MICRF219A is ideal for low-cost, low-power, RKE, TPMS, and remote ? No IF filter required actuation applications. ? 60dB analog RSSI output range The MICRF219A achieves -110dBm sensitivity at a bit ? 3.0V to 3.6V supply voltage range rate of 1kbps with 0.1% BER. Four demodulator filter ? 4.3mA supply current at 315MHz bandwidths are selectable in binary steps from 1625Hz to ? 6.0mA supply current at 434MHz 13kHz at 433.92MHz, allowing the device to support bit ? 13?A supply current in sleep mode rates up to 20kbps. The device operates from a supply voltage of 3.0V to 3.6V, and typically consumes 4.3mA of ? 0.1?A supply current in shutdown mode supply current at 315MHz and 6.0mA at 433.92MHz. A ? 16-pin QSOP package (4.9mm x 6.0mm) shutdown mode reduces supply current to 0.1?A typical. ? -40?C to +105 ?C temperature range ? 3kV HBM ESD Rating Datasheets and support documentation can be found on Micrel?s website at: www.micrel.com. _________________________________________________________________________________________________________________________ Typical Application MICRF219A Typical Application Circuit (433.92MHz, 1kbps) Micrel Inc. ? 2180 Fortune Drive ? San Jose, CA 95131 ? USA ? tel +1 (408) 944-0800 ? fax + 1 (408) 474-1000 ? http://www.micrel.com August 12, 2015 Revision 3.0 RadioTech@micrel.com or (408) 944-0800 Micrel, Inc. MICRF219A Ordering Information Part Number Temperature Range Package MICRF219AAYQS ?40 ?C to +105 ?C 16-Pin QSOP Pin Configuration MICRF219AAYQS Pin Description Pin Pin Pin Function Number Name Reference resonator connection to the Pierce oscillator. May also be driven by external reference signal of 1 RO1 200mVp-p to 1.5V p-p amplitude maximum. Internal capacitance of 7pF to GND during normal operation. 2 GNDRF Ground connection for ANT RF input. Connect to PCB ground plane. Antenna Input: RF Signal Input from Antenna. Internally AC coupled. It is recommended to use a matching 3 ANT network with an inductor to RF ground to improve ESD protection. 4 GNDRF Ground connection for ANT RF input. Connect to PCB ground plane. Positive supply connection for all chip functions. Bypass with 0.1?F capacitor located as close to the VDD 5 VDD pin as possible. Squelch Control Logic-Level Input. An internal pull-up (5?A typical) pulls the logic-input HIGH when the 6 SQ device is enabled. This feature is not recommended in MICRF219A and this pin should remain floating. Tie this pin to VDD to ensure robust register programming. Use register bits D[4:3] to set demodulation 7 SEL0 bandwidth. Shutdown Control Logic-Level Input. A logic-level LOW enables the device. A logic-level HIGH places the device in low-power shutdown mode. An internal pull-up (5?A typical) pulls the logic input HIGH. To ensure 8 SHDN that the part starts up correctly, connect a 1?F capacitor from VDD to SHDN, and a 50kO resistor from SHDN pin to GND. After the supply voltage settles, apply a HIGH logic level voltage to SHDN to turn the part off, then a LOW logic level voltage to turn the part on before programming or operating the device. 9 GND Ground connection for all chip functions except for RF input. Connect to PCB ground plane. Data Output. Demodulated data output. A current limited CMOS output during normal operation, 25kO pull- 10 DO down is present when device is in shutdown. Tie this pin to VDD to ensure robust register programming. Use register bits D[4:3] to set demodulation 11 SEL1 bandwidth. Revision 3.0 August 12, 2015 2 RadioTech@micrel.com or (408) 944-0800 MICRF219A 300MHz to 450MHz ASK/OOK Receiver with Auto-Poll, and RSSI General Description Features The MICRF219A is a 300MHz to 450MHz super- ? ?110dBm sensitivity at 1kbps with 0.1% BER heterodyne, image-reject, RF receiver with automatic gain ? Auto-polling mode with bit checking control, ASK/OOK demodulator, and analog RSSI output. ? Supports bit rates up to 20kbps at 433.92MHz It only requires a crystal and a minimum number of ? 25dB image-reject mixer external components to implement. The MICRF219A is ideal for low-cost, low-power, RKE, TPMS, and remote ? No IF filter required actuation applications. ? 60dB analog RSSI output range The MICRF219A achieves -110dBm sensitivity at a bit ? 3.0V to 3.6V supply voltage range rate of 1kbps with 0.1% BER. Four demodulator filter ? 4.3mA supply current at 315MHz bandwidths are selectable in binary steps from 1625Hz to ? 6.0mA supply current at 434MHz 13kHz at 433.92MHz, allowing the device to support bit ? 13?A supply current in sleep mode rates up to 20kbps. The device operates from a supply voltage of 3.0V to 3.6V, and typically consumes 4.3mA of ? 0.1?A supply current in shutdown mode supply current at 315MHz and 6.0mA at 433.92MHz. A ? 16-pin QSOP package (4.9mm x 6.0mm) shutdown mode reduces supply current to 0.1?A typical. ? -40?C to +105 ?C temperature range ? 3kV HBM ESD Rating Datasheets and support documentation can be found on Micrel?s website at: www.micrel.com. _________________________________________________________________________________________________________________________ Typical Application MICRF219A Typical Application Circuit (433.92MHz, 1kbps) Micrel Inc. ? 2180 Fortune Drive ? San Jose, CA 95131 ? USA ? tel +1 (408) 944-0800 ? fax + 1 (408) 474-1000 ? http://www.micrel.com August 12, 2015 Revision 3.0 RadioTech@micrel.com or (408) 944-0800 MICRF219A 300MHz to 450MHz ASK/OOK Receiver with Auto-Poll, and RSSI General Description Features The MICRF219A is a 300MHz to 450MHz super- ? ?110dBm sensitivity at 1kbps with 0.1% BER heterodyne, image-reject, RF receiver with automatic gain ? Auto-polling mode with bit checking control, ASK/OOK demodulator, and analog RSSI output. ? Supports bit rates up to 20kbps at 433.92MHz It only requires a crystal and a minimum number of ? 25dB image-reject mixer external components to implement. The MICRF219A is ideal for low-cost, low-power, RKE, TPMS, and remote ? No IF filter required actuation applications. ? 60dB analog RSSI output range The MICRF219A achieves -110dBm sensitivity at a bit ? 3.0V to 3.6V supply voltage range rate of 1kbps with 0.1% BER. Four demodulator filter ? 4.3mA supply current at 315MHz bandwidths are selectable in binary steps from 1625Hz to ? 6.0mA supply current at 434MHz 13kHz at 433.92MHz, allowing the device to support bit ? 13?A supply current in sleep mode rates up to 20kbps. The device operates from a supply voltage of 3.0V to 3.6V, and typically consumes 4.3mA of ? 0.1?A supply current in shutdown mode supply current at 315MHz and 6.0mA at 433.92MHz. A ? 16-pin QSOP package (4.9mm x 6.0mm) shutdown mode reduces supply current to 0.1?A typical. ? -40?C to +105 ?C temperature range ? 3kV HBM ESD Rating Datasheets and support documentation can be found on Micrel?s website at: www.micrel.com. _________________________________________________________________________________________________________________________ Typical Application MICRF219A Typical Application Circuit (433.92MHz, 1kbps) Micrel Inc. ? 2180 Fortune Drive ? San Jose, CA 95131 ? USA ? tel +1 (408) 944-0800 ? fax + 1 (408) 474-1000 ? http://www.micrel.com August 12, 2015 Revision 3.0 RadioTech@micrel.com or (408) 944-0800 Micrel, Inc. MICRF219A Ordering Information Part Number Temperature Range Package MICRF219AAYQS ?40 ?C to +105 ?C 16-Pin QSOP Pin Configuration MICRF219AAYQS Pin Description Pin Pin Pin Function Number Name Reference resonator connection to the Pierce oscillator. May also be driven by external reference signal of 1 RO1 200mVp-p to 1.5V p-p amplitude maximum. Internal capacitance of 7pF to GND during normal operation. 2 GNDRF Ground connection for ANT RF input. Connect to PCB ground plane. Antenna Input: RF Signal Input from Antenna. Internally AC coupled. It is recommended to use a matching 3 ANT network with an inductor to RF ground to improve ESD protection. 4 GNDRF Ground connection for ANT RF input. Connect to PCB ground plane. Positive supply connection for all chip functions. Bypass with 0.1?F capacitor located as close to the VDD 5 VDD pin as possible. Squelch Control Logic-Level Input. An internal pull-up (5?A typical) pulls the logic-input HIGH when the 6 SQ device is enabled. This feature is not recommended in MICRF219A and this pin should remain floating. Tie this pin to VDD to ensure robust register programming. Use register bits D[4:3] to set demodulation 7 SEL0 bandwidth. Shutdown Control Logic-Level Input. A logic-level LOW enables the device. A logic-level HIGH places the device in low-power shutdown mode. An internal pull-up (5?A typical) pulls the logic input HIGH. To ensure 8 SHDN that the part starts up correctly, connect a 1?F capacitor from VDD to SHDN, and a 50kO resistor from SHDN pin to GND. After the supply voltage settles, apply a HIGH logic level voltage to SHDN to turn the part off, then a LOW logic level voltage to turn the part on before programming or operating the device. 9 GND Ground connection for all chip functions except for RF input. Connect to PCB ground plane. Data Output. Demodulated data output. A current limited CMOS output during normal operation, 25kO pull- 10 DO down is present when device is in shutdown. Tie this pin to VDD to ensure robust register programming. Use register bits D[4:3] to set demodulation 11 SEL1 bandwidth. Revision 3.0 August 12, 2015 2 RadioTech@micrel.com or (408) 944-0800 Micrel, Inc. MICRF219A Pin Description (Continued) Pin Pin Pin Function Number Name Demodulation Threshold Voltage Integration Capacitor. Connect a 0.1?F capacitor from CTH pin to GND 12 CTH to provide a stable slicing threshold. AGC Filter Capacitor. Connect a capacitor from this pin to GND. Refer to the AGC Loop and CAGC 13 CAGC section for information on the capacitor value. Received Signal Strength Indicator. The voltage on this pin is an inversed amplified version of the voltage 14 RSSI on CAGC. Output is from a switched capacitor integrating op amp with 250O typical output impedance. 15 SCLK Programming clock input. Reference resonator connection to the Pierce oscillator. Internal capacitance of 7pF to GND during normal 16 RO2 operation. Revision 3.0 August 12, 2015 3 RadioTech@micrel.com or (408) 944-0800

Tariff Concession Code
Tariff Desc

Free
8542.31.00 61 No ..Linear/analogue and peripheral integrated circuits, timers, voltage regulators, A/D and D/A converters, telecommunication and modem integrated circuits, other than board level products8542.31.00

Customer Comments  

Log in or register to post comments.

Customer Reviews

No reviews yet.