LZ4-4MCPCB

LedEngin, Inc. 10W Emitter on Serially Connected MCPCB Option LZ4-4xxx10 Key Features Typical Thermal Resistance for MCPCB adds only 2C/W Multiple mounting options MCPCB contains a Zener Diode for enhanced ESD protection Available Products Table 1: 10W Emitter Colors 1 Part Number Link Red LZ4-40R110 Deep Red LZ4-40R210 Green LZ4-40G110 Blue LZ4-40B210 Amber LZ4-40A110 Cool White LZ4-40CW10 Neutral White LZ4-40NW10 Warm White LZ4-40WW10 Dental Blue LZ4-40DB10 UV LZ4-40UA10 Notes: 1. Click on Emitter Link for emitter data sheet. Description The LZ4-4xxx10 Serially Connected MCPCB option provides a convenient method to mount LedEngins 10W emitters. The MCPCB connects all four (4) LED die in series and provides 2 Anode and 3 Cathode contact pads. The six recessed features allow the use of M3 or 4 screws to attach the MCPCB to a heat sink. The MCPCB also contains a Zener diode for enhanced ESD protection. R Lookup Table J-B Table 2: Typical Typical Typical Emitter + Product Emitter + MCPCB = MCPCB R R J-C C-B 1 R J-B 10W 2.7C/W + 2C/W = 4.7C/W Note for Table 2: 1. R is the combined thermal resistance from the LED die junction to the Aluminum core on MCPCB J-B (R + R = R ). J-C C-B J-B Emitter on Standard MCPCB Dimensions (mm) Figure 1: Standard MCPCB outline dimensions (mm). Note for Figure 1: 1. Unless otherwise noted, the tolerance = 0.20 mm. 2. Slots in MCPCB are for M3 or 4 mounting screws. 3. LedEngin recommends plastic washers to electrically insulate screws from solder pads and electrical traces. 4. Electrical connection pads on MCPCB are labeled + for Anode and - for Cathode. 5. LedEngin recommends using thermally conductive tape or adhesives when attaching MCPCB to a heat sink. 2 LedEngin, Inc. LZ4-4xxx10 (R.0a - 05/12/08)