HFE6192-761

F i n i s a r Product Specification 10Gbps 850nm VCSEL, LC and SC TOSA Package HFE6x92-761 PRODUCT FEATURES High performance VCSEL Low electrical parasitic TO package with flexible interface Data rates from DC to 12.5Gbps Complete isolation between the VCSEL, Monitor Photodiode and Case Mechanically compatible with all 10Gbps MSAs The HFE6x92-761 uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 10Gbps data communication over multimode optical fiber. Applications include Ethernet, Fibre Channel and ATM protocols. The optical assembly is designed to inter-face either 50 m or 62.5 m multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203. The HFE6x92-761 incorporates a power monitoring photodiode that can be used for temperature compensation, average power control, and for compliance with Class 1 eye safety limits. PRODUCT SELECTION Part Number Description HFE6192-761 Differentially Driven, attenuated, LC TOSA, with 50 flex HFE6392-761 Differentially Driven, attenuated, SC TOSA, with 50 flex Confidential and Proprietary 2014 Finisar Corporation. All rights reserved Rev. B01 Page 1 HFE6x92-761 Product Specification Dec 2014 F i n i s a r I. Absolute Maximum Ratings Parameter Rating Storage Temperature -40 to +85C Case Operating Temperature 0* to +85C Lead Solder Temperature 260C, 10 sec. Reverse Power Supply Voltage 5V Max continuous forward current 12mA 1 ESD Exposure (Human Body Model) 150V Notice Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Notice The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product Confidential and Proprietary 2014 Finisar Corporation. All rights reserved Rev. B01 Page 2