SF-2410F1500W-2

SinglFuse SF-2410F-W Series Features Single blow fuse for overcurrent Surface mount packaging for automated protection assembly 6125 (EIA 2410) footprint Fast acting fuse UL 248-14 compliant RoHS compliant* and halogen free** Wire core SMD design SF-2410F-W Series - Fast Acting Wire Core Surface Mount Fuses Clearing Time Characteristics for Series Additional Information Click these links for more information: Clearing Time at 25 C % of Current Rating Min. Max. 100 % 4 hours PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT SELECTOR LIBRARY 200 % 0.01 seconds 20 seconds Electrical Characteristics Certifications Rated Current Resistance Rated Interrupting Typical Model 2 2 (A) () Typ.*** Voltage Rating I t (A s) **** cUL: E198545 SF-2410F1200W-2 12.0 0.0053 49.69 50 A 65 VAC 50 A 65 VDC 300 A 32 VDC SF-2410F1500W-2 15.0 0.0038 103.5 65 VAC 65 VDC 50 A 65 VAC SF-2410F2000W-2 20.0 0.0034 100 A 65 VDC 127.5 300 A 32 VDC *** Resistance value measured with 10 % rated current at 25 C ambient. Tolerance 25 %. 2 **** Melting I t calculated at 0.001 second pre-arcing time. Reliability Testing No. Test Requirement Test Condition Test Reference DCR change 20 % ( 10 % for 1 A) 3 reflows at 245 C followed by a Refer to STP 1 Reflow and bend No mechanical damage 2 mm bend document MIL-STD-202 2 Solderability Minimum 90 % coverage One dip at 245 C for 5 seconds Method 208 Soldering heat DCR change 20 % ( 10 % for 1 A) MIL-STD-202 3 One dip at 260 C for 10 seconds resistance New solder coverage 75 % Method 210 DCR change 15 % MIL-STD-202 4 Moisture resistance 10 cycles No excessive corrosion Method 106 DCR change 10 % MIL-STD-202 5 Salt spray 48 hour exposure, 5 % salt solution No excessive corrosion Method 101 DCR change 10 % 0.4 inch D.A. or 30 G between MIL-STD-202 6 Mechanical vibration No mechanical damage 5-3000 Hz Method 204 DCR change 10 % MIL-STD-202 7 Mechanical shock 1500 G, 0.5 ms, half-sine shocks No mechanical damage Method 213 DCR change 10 % MIL-STD-202 8 Thermal Shock 100 cycles between -65 C and +125 C No mechanical damage Method 107 No electrical opens during testing 80 % rated current (75 % for < 1 A fuses) Refer to STP 9 Life Voltage drop change shall be less for 2000 hours at ambient temperature document than 20 % of initial value +25 C *RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be halogen free if (a) the Bromine (Br) content is 900 ppm or less (b) the Chlorine (Cl) content is 900 ppm or less and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. SinglFuse is a trademark of Bourns, Inc. WARNING Cancer Specications are subject to change without notice. and Reproductive Harm Users should verify actual device performance in their specic applications. The products described herein and this document are www.P65Warnings.ca.gov subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. *RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-2410F-W Series Applications LCD / LED TVs Notebooks / ultrabooks White goods Telecom systems PC servers Chargers LCD monitors DC/DC converters DC/AC inverters SF-2410F-W Series Fast Acting Wire Core Surface Mount Fuses 2 Average Pre-Arcing Time vs. Current Curves Average I t vs. t Curves 20.0 A 15.0 A 12.0 A 100000 20.0 A 100 15.0 A 12.0 A 10 10000 1 1000 0.1 100 0.01 10 0.001 10 100 1000 0.001 0.01 0.1 1 10 100 TIME (SECONDS) CURRENT (A) Environmental Characteristics Operating Temperature ................................................................................................................................................................-55 C to +125 C Storage Conditions Temperature .............................................................................................................................................................................. +5 C to +35 C Humidity.........................................................................................................................................................................................40 % to 75 % Shelf Life..........................................................................................................................................................2 years from manufacturing date Moisture Sensitivity Level ...................................................................................................................................................................................... 1 ESD Classification (HBM)............................................................................................................................................................................ Class 6 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PRE-ARCING TIME (SECONDS) 2 2 (A s) I t