X-On Electronics has gained recognition as a prominent supplier of DC2575A led lighting development tools across the USA, India, Europe, Australia, and various other global locations. DC2575A led lighting development tools are a product manufactured by Analog Devices. We provide cost-effective solutions for led lighting development tools, ensuring timely deliveries around the world.

DC2575A

DC2575A electronic component of Analog Devices
Images are for reference only
See Product Specifications
Part No.DC2575A
Manufacturer: Analog Devices
Category:LED Lighting Development Tools
Description: LED Lighting Development Tools LT8391AIFE Demo Board 60V, 2MHz Synchronous 15.A Buck-Boost LED Driver Controller
Datasheet: DC2575A Datasheet (PDF)
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 185.1164 ea
Line Total: USD 185.12

Availability - 0
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - WHS 1


Ships to you between Wed. 05 Jun to Fri. 07 Jun

MOQ : 1
Multiples : 1
1 : USD 240.9907

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Product
For Use With
Operating Supply Voltage
Series
Output Current
Brand
Product Type
Factory Pack Quantity :
Subcategory
Hts Code
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Part-Description
Stock Image 102781-HMC272AMS8
- HMC272AMS8E Mixer 1.7GHz ~ 3GHz Evaluation Board
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 104991-HMC327MS8G
Analog Devices Hittite RF Development Tools Eval PCB
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 105706-HMC384LP4
Analog Devices Hittite Clock & Timer Development Tools Eval PCB
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 105706-HMC506LP4
Analog Devices Hittite Clock & Timer Development Tools Eval PCB
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 107384-HMC493LP3
RF Development Tools HMC493LP3 Evaluation PCB
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 107755-HMC454ST89
Sub-GHz Development Tools HMC454ST89 Evaluation PCB, 900 MHz
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 108190-HMC591LP5
RF Development Tools HMC591LP5 Evaluation PCB
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 106137-HMC370LP4
Analog Devices Hittite RF Development Tools Eval PCB
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 106137-HMC443LP4
RF Development Tools HMC443LP4 Evaluation PCB
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 109266-HMC550A
RF Development Tools HMC550A EVALUATION PCB ASSEMBLY
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Image Part-Description
Stock Image FEBFL7733A_L53U021A
LED Lighting Development Tools Evaluation Board
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 1792
LED Lighting Development Tools LED Sequins Rose Pink - 5 pack
Stock : 11
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image TPS92510EVM-011
TPS92510 1, Non-Isolated Outputs LED Driver Evaluation Board
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LM3404FSTDIMEV/NOPB
LED Lighting Development Tools LM3404FSTDIMEV EVAL BOARD
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image PAM2803EV1
LED Lighting Development Tools 3W 1A Step-Up Converter LED driver
Stock : 2
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image TPS61195EVM-460
LED Lighting Development Tools TPS61195 Eval Mod
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image STEVAL-ILL074V1
LED Lighting Development Tools 60 W wide input range flyback converter using HVLED001A quasi resonant flyback controller
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image STEVAL-ILL063V1
LED Lighting Development Tools 3 A LED driver based on the LED5000 in floating boost topology
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image FEBFL7734_L55H008A
LED Lighting Development Tools Evaluation Board
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image IS32LT3126-ZLA3-EB
LED Lighting Development Tools Eval Board for IS32LT3126
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
We proudly offer the DC2575A LED Lighting Development Tools at competitive prices in the United States, Australia, India, Europe and more. By maintaining strong relationships with manufacturers and optimizing our operations, we provide significant savings to our customers. Customer satisfaction is at the heart of our business. Our knowledgeable and friendly customer service team is always ready to assist you with any inquiries or issues. From product selection to after-sales support, we are dedicated to providing our customers with a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why we are the top choice for the DC2575A LED Lighting Development Tools.

DEMO MANUAL DC2575A LT8391AIFE 60V 2MHz Synchronous Buck-Boost LED Driver DESCRIPTION Demonstration circuit DC2575A is a 60V 2MHz synchro- Small ceramic input and output capacitors are used to nous buck-boost LED driver featuring the LT8391A. It save space and cost. The board is designed with capaci- accepts an input voltage from 4V to 60V and drives a tors on both sides of the synchronous switches for a single string of LEDs up to 16V at 1.5A. DC2575A runs at reduction in radiated EMI. The open LED overvoltage 2MHz switching frequency without spread spectrum, but protection uses the ICs constant voltage regulation loop spread spectrum frequency modulation (SSFM) can be to regulate the output to approximately 18V if the LED + enabled with a simple jumper. SSFM spreads the switch- string is opened. There is a protection diode from LED ing frequency from f to f +25% for reduced EMI. to GND to prevent negative ringing during a short-circuit SW SW with long wires. DC2575A uses AEC-Q automotive-approved components such as power MOSFETs, diodes, input and output capaci- Undervoltage lockout can be adjusted on the circuit with tors and inductors. a few simple resistor choices. The LT8391A has a wide input voltage range down to EMI filters and gate resistors on the demo circuit reduce 4V and up to 60V. It has adjustable switching frequency this high power converters EMI below CISPR 25 Class 5 between 600kHz and 2MHz. There is a simple jumper limits. This is intended for automotive applications where option for external frequency synchronization, spread CISPR 25 EMI standards are observed. In non-automotive spectrum frequency modulation, or neither. applications, the EMI may not be as important and the input and output filters, as well as the gate resistors can The LT8391A can be PWM dimmed with an external PWM be removed for higher efficiency. Please note the optional signal and an internally-generated PWM signal. DC2575A EMI components in the parts list. SSFM is also used to has a jumper that can be set to switch between internally- reduce EMI and is not necessary in applications where generated PWM signal, externally-generated PWM signal, EMI is not important. and no PWM signal (100% on). It can be analog dimmed with a control voltage on either of its two control pins. The LT8391A data sheet gives a complete description of + LT8391A features both open LED and short LED (LED to the part, operation and applications information. The data GND) protection as well as a fault output flag. sheet must be read in conjunction with this Demo Manual for demonstration circuit DC2575A. The LT8391AIFE is When run with both PWM dimming and spread spectrum, assembled in a 28-lead plastic TSSOP (FE) package with the spread spectrum aligns itself with the PWM signal for a thermally-enhanced ground pad. Proper board layout flicker-free operation. is essential for maximum thermal performance. See the data sheet sectionLayout Consideration. Design files for this circuit board are available at DEMO MANUAL DC2575A QUICK START PROCEDURE Table 1. Typical Performance Summary for DC2575A LT8391A PARAMETER CONDITIONS MIN TYP MAX Input Voltage PV Range Operating V 16V 4V 60V IN LED Switching Frequency (f ) R3 = 59.0k, JP1 = NO SSFM/SYNC 2.0MHz SW Spread Spectrum (SSFM) Frequency Range JP1 = SSFM ON f f 1.25 SW SW I R2 = 0.056 7.0V < PV < 60V V 16V 1.5A LED IN LED R9 = 90.9k, R10 = 113k V range R5 = 1M, R6 = 54.9k 4.8V 16V LED Open LED Voltage V R5 = 1M, R6 = 54.9k 18.2V OUT Typical Efficiency (100% PWM DC) PV = 13V, V = 16V, I = 1.5A 92% IN LED LED Internally-Generated PWM Dimming Range JP2 = INT, JP3 = INT 1/128 100% Internally-Generated PWM Dimming Frequency JP2 = INT, JP3 = INT R30 = 301k, R3 = 59.0k 488Hz Peak Switch Current Limit Boost Region R1 = 0.006 8.3A Peak Switch Current Limit Buck Region R1 = 0.006 8.3A PV Undervoltage Lockout (UVLO) falling R7 = 383k, R8 = 165k 4.3V IN PV Enable Turn-On (EN) Rising R7 = 383k, R8 = 165k 5.1V IN Demonstration circuit 2575A is easy to set up to evaluate 7. Observe the LED string running at the programmed the performance of the LT8391A follow the procedure: LED current. 1. With power off, connect a string of LEDs that will run 8. To change the brightness with analog dimming, sim- with forward voltage less than or equal to 16V (at ply attach a voltage source to either the CTRL1 or + 1.5A) to the LED and LED banana jacks on the PCB CTRL2 terminal and set the voltage between 0V and as shown in Figure 1. 1.5V. See data sheet for details. 2. Connect the EN/UVLO terminal to GND. 9. To change brightness with external PWM dimming, set JP2 to EXT/ON and JP3 to EXT. Attach a 3V rect- 3. Set JP2 to EXT/ON and JP3 to ON for 100% always- angular waveform with varying duty cycle to the PWM on LED operation. Set JP1 to NO SSFM/SYNC to run terminal. without SSFM. 10. To change brightness with internally-generated PWM 4. With power off, connect the input power supply to the dimming, set JP2 to INT and JP3 to INT. Adjust the PV and GND banana jacks. Make sure that the DC IN setting of the VR1 variable resistor with a small flat- input voltage will not exceed 60V. head screwdriver to toggle between 0% and 100% 5. Turn the input power supply on and make sure the PWM dimming duty cycle in 1/128 steps. voltage is between 4V and 60V for proper operation. 11. To enable spread spectrum frequency modulation, set 6. Release the EN/UVLO-to-GND connection. JP1 to SSFM ON. dc2575af 2

Tariff Desc

8543.70.00 Other machines and apparatus Free
13 Signal processors (graphic equalisers, crossovers etc.) 91 Other Free

9027.10.00 Instruments and apparatus for physical or chemical analysis (eg, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes Free

9031.80.00 MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS Other instruments, appliances and machines Free

9030.31.00 Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiations.
Other instruments and apparatus, for measuring or checking voltage, current, resistance or power Multimeters without a recording device Free

8473.30.00 Parts and accessories of the machines of 8471 AUTOMATIC DATA PROCESSING MACHINES AND UNITS THEREOF; MAGNETIC OR OPTICAL READERS, MACHINES FOR TRANSCRIBING DATA ONTO DATA MEDIA IN CODED FORM AND MACHINES FOR PROCESSING SUCH DATA, NOT ELSEWHERE SPECIFIED OR INCLUDED:
.Other 71 No Weighing less than 1kg Free

8537 BOARDS, PANELS, CONSOLES, DESKS, CABINETS AND OTHER BASES, EQUIPPED WITH TWO OR MORE APPARATUS OF 8535 OR 8536, FOR ELECTRIC CONTROL OR THE DISTRIBUTION OF ELECTRICITY, INCLUDING THOSE INCORPORATING INSTRUMENTS OR APPARATUS OF CHAPTER 90, AND NUMERICAL CONTROL APPARATUS, OTHER THAN SWITCHING APPARATUS OF 8517:
8538 PARTS SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH THE APPARATUS OF 8535, 8536 OR 8537:
8538.10.10 22 For programmable controllers Free
AD4
ANALOG DEVICES
Analog Devices Hittite
ANALOG DEVICES (LINEAR TECHNOLOGY)
ANALOG DEVICES (MAXIM INTEGRATED)
ANALOG DEVICES (TRINAMIC)
Analog Devices / Hittite
Analog Devices / Linear Technology
Analog Devices Inc
Analog Devices Inc.
Analog Devices, Inc.
DA4
Dallas
DALLAS / MAXIM
Dallas Semiconductor (VA)
LINEAR
LINEAR TECH
Linear Technology
Linear Technology (part of ADI)
LT
LT4
MAXIM
Maxim Integrated
MAXIM INTEGRATED / ANALOG DEVICES
Maxim Integrated Products
MAXIM-DALLAS
MX4
Technology
Trinamic
TRINAMIC / ANALOG DEVICES
Trinamic Motion Control
Trinamic Motion Control GmbH

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted